Scroll Top

Certified network cabling and fibre installation, tested and documented, across the Eastern Cape.

Cimtro Systems is a Molex and Meganet certified cabling installer based in Walmer, Gqeberha. We design, install, splice and test copper and fibre networks for offices, factories, warehouses, campuses and government sites, and we hand over the test results to prove every link works.

Installer Record

Molex
● Certified Installer
Meganet
● Certified Installer
Copper
Cat5e · Cat6 · Cat6A
Fibre
In-house splicing & optical testing
Testing
Every link tested, results handed over
Base
Walmer, Gqeberha
Coverage
Eastern Cape
In IT since
30 years under the same owner
Network Cabling Before and After

In short

Who do you call for a cabling project in the Eastern Cape?

Cimtro Systems is a Gqeberha-based IT company and a Molex and Meganet certified structured cabling installer. It installs Cat6 and Cat6A copper cabling and fibre optic backbones across the Eastern Cape, and owns its own fibre splicing equipment, fibre test equipment and copper qualification testers. That means it can install, terminate, test and document a network without subcontracting any of the work. Because Cimtro also supports networks day to day, the cabling is designed by the people who will look after it afterwards.

At a glance

What a client gets from a Cimtro cabling project

Certifications Molex Certified Installer and Meganet Certified Installer: trained on each manufacturer’s copper and fibre systems and eligible to register qualifying installations for manufacturer warranty.
Copper cabling Cat6 and Cat6A structured cabling for desks, Wi-Fi access points, CCTV, access control and PoE devices. Existing Cat5e and Cat6 runs are tested and qualified.
Fibre optics Backbones between floors and buildings, campus and yard links, and fibre into server and comms rooms. Splicing and termination are done in-house.
Test equipment Our own fibre splicing and optical test equipment, plus network testing and qualification testers for Cat5e and Cat6 links. No hired-in kit and no subcontracted testing.
Handover Labelled outlets, panels and cables; a test result for every link; and as-built records your IT team can actually use.
After the install The same company supports your network, firewalls, Wi-Fi and servers, with maintenance contracts up to 24/7.

Network cabling and fibre services

From a 20-point office fit-out to a multi-building fibre backbone, one team covers the whole job: survey, design, install, test, document and support.

01 / Copper

Cat6 & Cat6A structured cabling

Horizontal cabling from patch panel to outlet, installed to manufacturer specifications so it qualifies for system warranty.

  • New office and building fit-outs
  • Cat6A for 10 Gb/s and high-power PoE
  • Floor boxes, trunking and containment

02 / Fibre

Fibre backbones & building links

Single-mode and multimode fibre between floors, buildings, warehouses, workshops and guardhouses, where copper can’t cover the distance or the environment.

  • Campus, plant and yard links
  • Riser and server-room backbones
  • Indoor, outdoor and armoured cable

03 / Splicing

Fibre splicing & termination

Splicing, pigtails and patch panels done on site with our own equipment, including repairs to damaged or cut fibre runs.

  • Splice trays and enclosures
  • Fibre patch panels and ODFs
  • Break-fix on existing fibre

04 / Testing

Testing & qualification

Every copper and fibre link is tested before handover, and existing cabling can be tested to find out what it will actually support.

  • Copper link qualification
  • Fibre loss and continuity testing
  • Test reports per link

05 / Cabinets

Cabinets, racks & patching

Comms cabinet and server rack builds, cable management and colour-coded patching that stays understandable years later.

  • Floor-standing and wall-mount cabinets
  • Power, earthing and airflow
  • Labelling to a documented scheme

06 / Remediation

Audits & clean-ups

For inherited “spaghetti” networks: we test what’s there, find faulty runs, and re-terminate, relabel and re-patch so the network can be supported again.

  • Cabling health audits
  • Fault finding on intermittent links
  • As-built documentation from scratch

Why certification matters

Certified installer means a warrantable system, not just cable in the ceiling

Anyone can pull cable. Cabling manufacturers only stand behind a system when one of their trained, certified installers puts it in with their components end to end, tests it and registers it.

That matters because your cabling should outlast several generations of switches, PCs and access points. A certified installation gives you a manufacturer’s written assurance that it will keep supporting the applications it was designed for. If it doesn’t, you have recourse beyond the installer.

Manufacturer certification

Molex Certified Installer

Molex Connected Enterprise Solutions offers a 25-year System Performance and Application Assurance Warranty on qualifying end-to-end Molex copper and fibre systems installed and registered by its certified installers. Cimtro is a certified installer, so qualifying Molex installations can carry that warranty.

Manufacturer certification

Meganet Certified Installer

Cimtro is certified on the Meganet structured cabling system, which gives clients a second certified, warrantable option to suit the budget and specification of each project.

Testing

Every link tested and documented before you sign off

Most cabling faults are invisible until the network is busy: a split pair, a poorly seated connector, a fibre splice with too much loss. We own our test equipment, so testing is part of every job rather than an optional extra.

Copper · Cat5e / Cat6 / Cat6A

Network testing & qualification

Qualification testing proves what each link can actually carry, such as 1 Gb/s or 10 Gb/s Ethernet and PoE, not just that the light comes on.

Checks – Wire map, length, opens, shorts, split and crossed pairs
Proves – Supported Ethernet speed and PoE capability per link
Output – Result per outlet, matched to the labelling scheme

Fibre · single-mode / multimode

Splicing & optical testing

Fibre is spliced and tested on site by our own technicians, so faults are found and fixed before handover rather than after go-live.

Checks – Continuity, polarity, splice and connector loss
Proves – Each link sits within its loss budget for the application
Output – Result per fibre core, recorded against the panel

Inherited a network nobody can explain? We can test your existing cabling, tell you which runs will support a switch, Wi-Fi or camera upgrade and which won’t, and quote only for what actually needs replacing.

How a project runs

From site survey to signed-off network

01

Survey

Site walk, outlet count, routes, containment and comms room assessment.

02

Design & quote

Copper/fibre split, cabinet layout and an itemised quote.

03

Install

Containment, cable runs, terminations and splicing, planned around your operations.

04

Test

Every copper and fibre link tested with our own equipment.

05

Handover

Labels, test results, as-builts and warranty registration where it applies.

06

Support

Ongoing network support from the same team.

The people on site

A long-standing local team, not a fly-in crew

The technicians who install your cabling are the same people who will support your network afterwards, and several of them have worked together for over 15 years.

Johan Rautenbach
Johan Rautenbach

Owner
30 Years’ experience in the IT industry. Microsoft Certified. Skilled in Server, security Linux and Networking.

JJ van der Merwe
JJ van der Merwe

Senior technical specialist
15 years with Cimtro, covering desktop, server and network infrastructure.

Thapelo Majara
Thapelo Majara

Cabling & Fibre Installations
Cabling and fibre installations, including splicing, termination and testing.

Ruhan van Rensburg
Ruhan van Rensburg

Technician
Data cabling, CCTV installations and desktop support.

Where we work

Based in Gqeberha, working across the Eastern Cape

Our base in Walmer puts the Nelson Mandela Bay metro, the Kariega and Coega industrial areas, and the Kouga coast within easy reach. We take on larger cabling and fibre projects further afield in the province.

  • Gqeberha (HQ)
  • Kariega
  • Despatch
  • Coega SEZ
  • Jeffreys Bay
  • Humansdorp
  • Makhanda
  • Port Alfred
  • East London

Environments we cable

Built for the sites the Eastern Cape actually has

Automotive & manufacturing
Plant floors, noisy environments, fibre between buildings.

Marine & port
Salt-air exposure, outdoor and armoured runs.

Government
Multi-office sites with documented, auditable installs.

Healthcare
Practices and clinics where downtime isn’t an option.

Logistics & fleet
Warehouses, yards, gatehouses and CCTV.

Offices & professional
Fit-outs, moves and Wi-Fi upgrades.

Questions

Network cabling and fibre: common questions

Cimtro Systems, based in Walmer, Gqeberha, is a Molex and Meganet certified cabling installer. Its team installs Cat6 and Cat6A copper cabling and fibre optic links across the Eastern Cape, and splices and tests fibre in-house with its own equipment.

Manufacturer warranties on structured cabling generally only apply when a certified installer installs an end-to-end system from that manufacturer and registers it. Molex, for example, offers a 25-year System Performance and Application Assurance Warranty on qualifying end-to-end Molex systems installed by its certified installers. Certification also shows that the installer has been trained on that manufacturer’s products and installation practices.

Cat6 suits most office networks at 1 Gb/s and supports 10 Gb/s over shorter runs. Cat6A supports 10 Gb/s across the full 90-metre permanent link and handles high-power PoE better, so it is the safer choice for new builds, Wi-Fi 6/6E/7 access points and anything meant to last 15 years or more.

Use fibre for backbones between floors or buildings, for runs longer than the 100-metre copper channel limit, between buildings where lightning and earth-potential differences are a risk, and in electrically noisy environments such as factories and plant rooms. Copper is still the practical choice for most desk, access point and camera connections.

Yes. Cimtro tests every copper and fibre link it installs and hands over the results together with labelling and as-built documentation, so you can see that each link performs before you sign off.

Yes. Cimtro audits existing networks, tests the cabling already in place, finds faulty or under-performing runs, and re-terminates, relabels and re-patches cabinets so the network is documented and easier to support.

Yes. From its base in Walmer, Gqeberha, Cimtro takes on cabling and fibre projects across the Eastern Cape, including Kariega, Despatch, Jeffreys Bay, Humansdorp, the Coega SEZ, Makhanda, Port Alfred and East London.

South Africa has no single legal licence for data cabling. Look for manufacturer installer certifications such as Molex or Meganet, which unlock system warranties, as well as proper test equipment, documented test results and references. Formal routes include the QCTO Occupational Certificate: Data and Telecommunications Cabler, and international credentials such as BICSI and the FOA CFOT.